Style Sampler
Layout Style
Patterns for Boxed Mode
Backgrounds for Boxed Mode
+ 91 4065546999 || + 91 9100971894
Products
Analytical and preparative injectors. For manual sample injection into HPLC systems. For usage with external sample loops or inject systems.
Needle injection port valve with starting switch (Cinch/Molex) up to 5ml
Description: Analytical/Semi-Preparative Injection Valve is a stainless steel two-position valve with needle injection port on the front side.
This valve offers the No-Flow-Interruption technology which reduces pressure spikes during position switching to a minimum. It has a built-in position sensor for starting data acquisition precisely at the point of injection.
The stator of the valve is made of stainless steel and features the DiaDur coating on its working face which not only protects the contact surface from wear but also improves the abrasion of the stator and rotor.
The needle port can be used with standard microliter syringes (e.g. Hamilton) or plastic type blunt syringes (with PST3 needle point style) with 0.7mm needles.
The valve is standardly delivered with PPS rotor seal.
50 000 injections warrantee!
Needle injection port valve with starting switch (Cinch/Molex)
Preparative Injection Valve is a stainless steel two-position valve with needle injection port on the front side.
This valve offers the No-Flow-Interruptiontechnology which reduces pressure spikes during position switching to a minimum. It has a built-in position sensor for starting data acquisition precisely at the point of injection.
The needle port can be used either with syringe needle delivered with the valve or any other blunt needle (with PST3 needle point style) with an outer diameter of 1.6mm.
The stator of the valve is made of stainless steel and features the DiaDur coating on its working face which not only protects the contact surface from wear but also improves the abrasion of the stator and rotor.
The valve is standardly delivered with PEEK rotor seal.
50 000 injections warrantee!
